Skylight / July 15, 2018 / Arnou Gabriaux
A skylight might seem like the easiest option for rooms that are cramped dingy and dark. In many cases it is but only if the right kind of skylight is combined with the right type of roof. Fixing a skylight on the roof is not like placing a window in the wall. Most of us think only of the interior when we fix skylights. But did you know that your first priority should be your roof followed by the positioning of the skylight on the roof? The shape of the roof is a vital to the selection of skylights. There are different skylights for sloped roofs and different skylights for flat roofs. Incorrect installation can lead to problems in the future.
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.