Skylight / July 11, 2018 / Nicolas Charlebois
After the hole is cut the skylight frame is simply attached to the roof sheathing with L-brackets and then the installation is completed using the factory-supplied flashing kit. Ease of installation superior insulating qualities less tendency to scratch and a cleaner finished appearance all add to the popularity and somewhat higher cost of glass skylights. Glass skylights also have a greater number of optional accessories. These include tempered laminated or wire glass; shades and blinds for light control; glass tints for heat retention or to block sunlight; and the ability to open fully or partially for ventilation. Domed acrylic skylights are less expensive than glass.
The air near the ceiling is automatically cooled when fresh air flows in from outside. These roof skylights are so designed that they open and close a little to let in the fresh air. The glass tilts at about 45 degrees. There is a small handle to manually open the venting roof skylight. You crank the handle slightly to open or close or adjust the angle and position of the glass. The venting roof skylights are located in the ceiling of the house and are hard to reach so there is an extension to the handle. Otherwise every time you want to open or shut the venting roof skylight you will need a ladder or a high stool. Nowadays electronically operated venting skylights are also becoming very popular.
Skylights let in outdoor light cutting down on both heating and electricity costs. When a skylight is designed and installed properly it can light an entire room provide heat and improve the appearance of your home or business. These are just some of the basic benefits to using skylights; you could even look into utilizing the solar power from your skylights in different ways to live more eco-friendly. No matter what type of home or business ceiling thickness you have there is a skylight design that will work for you. For buildings with thick ceilings attics or multi-storied buildings often utilize tubular skylights. For the layperson the easiest way to describe tubular skylight design is a long tubular channel with a collector at the top and a diffuser at the bottom that will illuminate an area between 75 and 150 square feet per skylight.