Skylight / July 11, 2018 / Nicolas Charlebois
Typically flat glass skylights include all the installation materials and they are among the easiest to install. Moreover because they are glass these flat skylights are less likely to scratch. Domed acrylic skylights are among the most affordable especially compared to glass alternatives. These skylights are available in a variety of tints making them an attractive addition to any home or room. Unfortunately domed acrylic skylights do not offer the same noise protection as glass varieties and they tend to be more susceptible to leaking. Function Now that you know a little bit about the types of skylights available you should take some time to consider their function.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.
Solar heat control glazing - Manufacturers use various glazing methods to reduce the impact of summer time solar heat gains and winter time heat losses. These come in the form of heat-absorbing tints double and tripled paned skylights and low-emissivity coatings. Slope When your window professional installs your skylight one of the factors they will take into consideration is the slope. The slope or tilt of the skylight affects the amount of solar heat gain. A low slope on your skylight admits more solar heat in the summer and less in the winter which is the opposite of the effect you are trying to achieve As a rule of thumb you want to achieve a slope equal to your geographical latitude plus 5 to 15 degrees.