Skylight / July 15, 2018 / Arnou Gabriaux
The shape of the skylights installed in your home will impact the design and look of the room. In the past skylights were prone to vapor build-up during the cold season. This vapor would then trickle down as water droplets into the room. However these days it is possible to buy skylights with channels that collect water vapor. More expensive skylights are less vulnerable to condensation related problems. Material: The kind of material used on skylights at home has a direct impact on their look and efficiency. Glass and plastic are the most popular materials used for glazing the skylights. Plastic skylights are less expensive and do not break easily. However plastic glazing may become discolored over time and may even have scratches. Glass on the other hand is scratch proof and does not fade. But it is more expensive and is usually found in commercial structures.
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.
It will also make all the difference for a skylight that doesnt have newer methods for moving condensation away from the window. It is possible that some skylights are suffering manufacturer related defects. Most worthy manufacturers of skylights or replacements will guarantee their product. A new and complete skylight will be sent and installed hopefully at no cost. It will require the same installation techniques as applied with the first but will obviously be better all around. It is often only when installing a replacement skylight that the damage caused by the original is noticed. The moisture damage caused to a roof is often hidden by the shingles and failed flashing around a skylight.