Skylight / November 14, 2018 / Onfroi Berger.
This means more heat is going to find its way into the room at the most inopportune times of the day. The problem can be rectified by careful selection of skylights. Skylights in the home are the easiest least expensive and most effective way of sprucing up your home and giving it a makeover. The reason why skylights are becoming immensely popular is the way they encompass a slice of the sky within the home. They can thus impart roominess to any room. But to get maximum impact from skylights in the home it is important to understand the design positioning and size of skylights. Size: As a rule specialists believe that skylights illuminate a room that is roughly 20 times the size of the room.
Solar heat control glazing - Manufacturers use various glazing methods to reduce the impact of summer time solar heat gains and winter time heat losses. These come in the form of heat-absorbing tints double and tripled paned skylights and low-emissivity coatings. Slope When your window professional installs your skylight one of the factors they will take into consideration is the slope. The slope or tilt of the skylight affects the amount of solar heat gain. A low slope on your skylight admits more solar heat in the summer and less in the winter which is the opposite of the effect you are trying to achieve As a rule of thumb you want to achieve a slope equal to your geographical latitude plus 5 to 15 degrees.
To maximize the energy efficiency of skylight windows you must choose the material carefully. Both glass and plastic skylights have their unique benefits and disadvantages. Glass is more durable but there are limitations in shape. It is also quite expensive. On the other hand plastic is flexible and can easily be bent or stretched to different shapes. It is inexpensive too. But plastic glazing has a tendency to change color after a while. More importantly irregular shapes lead to more heat loss as larger surface areas are exposed. Windows VS Skylights: It is wrong to believe that skylights can replace or take the place of windows.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.