Skylight / July 15, 2018 / Arnou Gabriaux
Fixed skylights are among the most popular and they come in a wide variety of shapes. Ventilated skylights can be opened and closed to allow the passage of air. These make a great addition to bathrooms and kitchens and they can be controlled by temperature sensor remote control wall switch and manual or motorized cranks. Tubular skylights are among the newest styles. They are popular because they are small and can be used where full-sized skylights will not fit. They allow for the passage of light and theyre installed the same way as regular skylights. Flat glass skylights are built into a framework (usually made of wood rubber or metal) and can be placed directly into a cut hole in your roof.
These are like Gods own television screens! Moreover skylights will usually bring in more light than windows and are a great alternative to artificial lighting. Skylights have been used in housing and other architecture from time immemorial and these can never go out of style. Very often skylights have been found in old churches. They add certain warmth and charm to the somber interiors. Skylights are used frequently in modern architecture as well and many modern malls hospitals restaurants and other large public places make use of skylights for natural daylight to light up common areas. When selected carefully and installed an energy-efficient skylight can help minimize heating cooling and lighting costs to very large extent.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.