Skylight / July 14, 2018 / Onfroi Berger
This means more heat is going to find its way into the room at the most inopportune times of the day. The problem can be rectified by careful selection of skylights. Skylights in the home are the easiest least expensive and most effective way of sprucing up your home and giving it a makeover. The reason why skylights are becoming immensely popular is the way they encompass a slice of the sky within the home. They can thus impart roominess to any room. But to get maximum impact from skylights in the home it is important to understand the design positioning and size of skylights. Size: As a rule specialists believe that skylights illuminate a room that is roughly 20 times the size of the room.
To make sure that glass skylights are protected these are made of tempered glass on the outside and have a laminated pane on the inside. Position: Where and how you place skylights within the home is equally important. Location plays a vital role in natural lighting and solar heating. When they are placed on the roof and facing the north you can expect consistent but cool lighting. Skylights that face the east provide maximum solar energy in the mornings while those facing the west will give maximum afternoon sunlight. If heat is a problem you may install skylights in the shade of a tree or have a shading device on top of the skylight. The slope at which skylights are placed also controls the amount of heat and light received. Before buying skylights for the home do a little research. Prices tend to vary from a few hundred to a few thousand dollars. Price climbs with the addition of features like shading devices remote control and special glazing.
Angled where the shaft is parallel to the pitch of the skylight. It too is the same dimension as the skylight but its straight-in angle offers more light than a straight shaft. Angled shafts also are used to connect two locations that cannot otherwise be aligned. This occurs when the skylight must be installed in a particular spot - between two trusses for example - and the shaft opening is likewise limited to a particular location on the ceiling that is not directly under the skylight. Splayed or pyramid in which the ceiling opening is larger than the skylight opening in width length or both. This type although a little harder to construct is the most popular simply because it allows a smaller skylight to illuminate a larger area.